|
1. | Shut off the water supply before installation. |
| 2. | Rough in ½" male IPS with ½" of threads past the finished wall, 3 3/8" on center. The shower head has a 1/2" IPS connection, the shower arm is 15 1/4" long, the handheld hose is 5 feet long. |
| 3. | Install the straight wall mount couplers to the ½" nipples. |
| 4. | Install the main valve onto the wall mount couplers. |
| 5. | Install the shower arm onto the 90 degree elbow and epoxy in place. |
| 6. | Thread the riser onto the 90 degree elbow and epoxy in place. |
| 7. | The riser is 36", push the riser into the main valve body and use the riser nut to seal the riser connection. |
| 8. | Attach wall bracket for the handheld shower to the wall, if your set has one. |
| 9. | Turn on water supply and check for leaks |
